Xircom EAG2919 Benutzerhandbuch

Eagle II GSM Radio Module Technical Manual Preliminary Draft: 08/31/00

33

Part Number: 07100017 version 00.04

© 2000 Xircom, Inc. All rights reserved.
All trademarks and copyrights are the property of Xircom, Inc.

The default traffic channel type for the Eagle II module is for data. The following example
provides the AT command for requesting the Eagle II module to initiate a data call.

AT + FCLASS = 0

Sets the traffic channel type to Data mode if the traffic
channel was previously changed to Voice mode.
(Data mode is the default traffic channel type.) Not
required if in the default mode

Note: This command is required only if the traffic
channel type has been changed from data mode
(default) to voice mode

OK

AT + CBST = 7,0,1

Sets the Bearer type to: 9600 Baud, non-Transparent
call

OK

ATD “1234567890”

AT command to dial the phone number

OK

CONNECT 9600

The OK response is followed by the “Connect 9600”
response when the connection is completed.

ATH

Terminates the call

OK