Trimble Inc. 10950 Benutzerhandbuch
4
Alloy GNSS reference receiver User Guide
Safety Information
Before you use your Trimble® Alloy GNSS reference receiver, make sure that you have read and
understood all safety requirements.
understood all safety requirements.
!
!
!
!
WARNING -
This alert warns of a potential hazard which, if not avoided, could result in severe
injury or even death.
!
!
!
!
CAUTION -
This alert warns of a potential hazard or unsafe practice that could result in minor
injury or property damage or irretrievable data loss.
NOTE –
An absence of specific alerts does not mean that there are no safety risks involved.
Use and care
This product is designed to withstand the rough treatment and tough environment that typically
occurs in construction applications. However, the receiver is a high-precision electronic instrument
and should be treated with reasonable care.
occurs in construction applications. However, the receiver is a high-precision electronic instrument
and should be treated with reasonable care.
!
!
!
!
CAUTION -
Operating or storing the receiver outside the specified temperature range can
damage it.
Regulations and safety
Some receiver models with base station capability contain an internal radio-modem for
transmission or can transmit through an external data communications radio. Regulations
regarding the use of the 410 MHz to 470 MHz radio-modems vary greatly from country to country.
In some countries, the unit can be used without obtaining an end-user license. Other countries
require end-user licensing. For licensing information, consult your local Trimble dealer.
transmission or can transmit through an external data communications radio. Regulations
regarding the use of the 410 MHz to 470 MHz radio-modems vary greatly from country to country.
In some countries, the unit can be used without obtaining an end-user license. Other countries
require end-user licensing. For licensing information, consult your local Trimble dealer.
NOTE –
The Alloy uses the 403 MHz to 473 MHz frequency range.
All Trimble receiver models described in this documentation are capable of transmitting data
through Bluetooth wireless technology.
through Bluetooth wireless technology.
Bluetooth wireless technology, and 900 MHz radio-modems and 2.4 GHz radio-modems operate in
license-free bands.
license-free bands.
NOTE –
900 MHz radios are not used in Europe. The frequency range of 900 MHz is not marketed in
Brazil.
Before operating a Trimble receiver or GSM modem, determine if authorization or a license to
operate the unit is required in your country. It is the responsibility of the end user to obtain an
operator's permit or license for the receiver for the location or country of use.
operate the unit is required in your country. It is the responsibility of the end user to obtain an
operator's permit or license for the receiver for the location or country of use.
For FCC regulations, see
Notices
.