Trimble Inc. TC900C Benutzerhandbuch
4 Installing the SNR900 Network
2 6 SNR900 Operation Manual
4.4.2
Infrastructure/Base Station Power and I/O Cable
The cable shown in Figure 4.6 is used for base station and repeater
installations of SNR900s. Cables come in the lengths shown in
Table 4.3.
installations of SNR900s. Cables come in the lengths shown in
Table 4.3.
Table 4.3
Available cable lengths
Note – Most installations of infrastructure radios require either a
7.5 m (25 ft) or a 30 m (99 ft) length.
7.5 m (25 ft) or a 30 m (99 ft) length.
Seal unused connectors by covering them with plastic tape.
Figure 4.6
Radio power and I/O cable (PN 38968-25)
Part number
Cable length
38968-25
7.5 m (25 ft)
40942-03
1 m (3 ft)
40942-40
12 m (40 ft)
40942-99
30 m (99 ft)
8-pin Bendix to SNR900
DB-9 to PC for data
or configuration
or configuration
Conxall to
MS750
MS750
TA-3 power
SNR900.book Page 26 Friday, December 3, 2004 2:02 PM