Wi Lan Inc EB02 Benutzerhandbuch
APR 2001 Rev 03
125
Appendix B: Using HyperTerminal
The Windows 95/98 operating system includes a terminal emulation program called HyperTerminal®. You can
use this program to access the AWE 120-58 configuration menus through the Serial port on the front of the
unit.
use this program to access the AWE 120-58 configuration menus through the Serial port on the front of the
unit.
Note: Users of the Asian version of Windows can use Tera Term™ shareware (available on the Internet) to
configure the AWE 120-58.
Starting HyperTerminal
To start HyperTerminal
1.
In Windows 95 or 98, from the Start menu, select Programs, Accessories, Communications,
HyperTerminal. The Connection Description window is displayed.
HyperTerminal. The Connection Description window is displayed.
2.
Select an icon for the HyperTerminal session and type a connection name.
3.
Click OK. The Connect To window is displayed.
4.
In the Connect using field, select the appropriate COM port.
5.
Click OK. The COM Properties window is displayed.
6.
Enter the following settings.
7.
Click OK. The AWE - HyperTerminal window is displayed.
8.
From the File menu, select Properties. The Properties window is displayed.
9.
Click the Settings tab and then click ASCII Setup. The ASCII Setup window is displayed.
Bits per second
9600
Data bits
8
Parity
None
Stop bits
1
Flow control
None