Wi Lan Inc EB02 Benutzerhandbuch

Activating New Software Images

APR 2001 Rev 03

155

10. Press Enter. The image file transfers from the PC to the unit. The status of the transfer, the file size and 

the transfer time are displayed.

Tip: If you type ftp> help, online instructions for using ftp are displayed.

11. Type bye and press Enter to exit ftp and return to the DOS window.

12. Activate the new software image. See 

, below.

After you download new image files to a unit, you need to configure the unit to operate from the new image 
rather than from the current image. If you are on-site, you can use the Main Menu to select the default image. 
See 

If you are at a remote location from the unit, you can use telnet to access the unit’s configuration menu or 
use SNMP manager software (SNMP parameter = defaultImage) to choose the default image file. See 

To delete old software images from a AWE unit, you must use ftp to connect to the unit, log in as a 
"supervisor" and delete images using the "ftp delete" command. Images The amount of flash memory available 
to store images is limited. To see the amount of memory available, see 

ftp>put .\<image filename>

200 Port set okay

150 Opening binary mode connection

226 Transfer complete

10484 bytes sent in 0.11 seconds (95.31 Kbytes/sec)

ftp>bye