Wi Lan Inc EB02 Benutzerhandbuch
Radio Module Configuration
APR 2001 Rev 03
83
➧
To set remote unit RF group
1.
From the Main Menu, select RF Module Configuration and press
Enter
. The g menu is displayed.
2.
Select Remote Unit RF Group and press
Enter
. The data field highlights.
3.
In the Remote Unit RF Group entry field, type the RF group number, using the following table as a guide.
4.
Press
Enter
. The new setting is displayed in the "New" column.
5.
Select Reboot New RF Configuration and press
Enter
. The unit reboots and the AWE 120-58
Login menu is displayed. The unit now runs using the "Current" remote unit RF group for the amount
of time specified by Config Test Minutes.
of time specified by Config Test Minutes.
6.
To save the current setting(s) to FLASH, log in, go to the Main Menu, and select Radio Module
Configuration,
Configuration,
Save Current Config to Flash. See
.
7.
Press
Esc
to exit to the Main Menu.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency (57410-58338) 5.7874 GHz 5.7874 GHz 5.7874 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 1 1 1
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) -> 0 0 0
Reboot New RF configuration Press Enter to Execute
Save Current Config to Flash Press Enter to Execute