Wi Lan Inc EB02 Benutzerhandbuch
Configuration
84
AWE 120-58 Installation & Configuration Guide
Rebooting and Saving RF Module Configurations
Because changes to radio module configuration settings can affect service in a wireless system, changes are
made in three progessive stages: new, current, and flash.
made in three progessive stages: new, current, and flash.
A reboot of a unit is required to save New settings as Current settings. If Current settings are valid (and do
not disrupt the system), they can be saved to Flash memory. If the changes disrupt the system, the original
configuration will be restored automatically when the Config Test Minutes period expires.
not disrupt the system), they can be saved to Flash memory. If the changes disrupt the system, the original
configuration will be restored automatically when the Config Test Minutes period expires.
➧
To reboot a unit
1.
From the Main Menu, select Radio Module Configuration and press
Enter
. The Radio Module
Configuration menu is displayed.
2.
Select Reboot New RF configuration and press
Enter
. The unit reboots with the with new
settings and with the Config Test Minutes timeout period in effect. The new settings can be viewed in the
"Current" column of the Radio Module Configuration menu. The old, last-saved configuration remains
in Flash memory.
"Current" column of the Radio Module Configuration menu. The old, last-saved configuration remains
in Flash memory.
If the configuration is the one you want and the unit operates as intended, you can save the current
changes to "permanent" flash memory by selecting Save Current Config to Flash from the
Radio Module Configuration menu. When you save the current settings to "Flash" the new settings
overwrite the old flash memory settings.
changes to "permanent" flash memory by selecting Save Current Config to Flash from the
Radio Module Configuration menu. When you save the current settings to "Flash" the new settings
overwrite the old flash memory settings.
New
Intended configuration changes. Temporary memory storage.
Current
Configuration actually running on the unit. Temporary memory storage.
Flash
Configuration stored in FLASH memory. Long-term memory storage.
Radio Module Configuration
New Current Flash
Station Type Remote Unit Remote Unit Remote Unit
Station Rank (1-1000) 1 1 1
Center Frequency (57410-58338) 5.7874 GHz 5.7874 GHz 5.7874 GHz
Security Password 1 (Hex) 1 1 1
Security Password 2 (Hex) 10 10 10
Security Password 3 (Hex) 100 100 100
Security Password 4 (Hex) 1000 1000 1000
Security Password 5 (Hex) 10000 10000 10000
Scrambling Code (Hex) 0 0 0
Acquisition Code (0-15) 1 1 1
Config Test Minutes (1-120) 30 30 30
Tx Power Level Adjust 0 dB 0 dB 0 dB
Base Station Only Parameters
Repeater Mode off off off
System Symmetry Type Asymmetric Asymmetric Asymmetric
Dynamic Polling Level (1-100) 1 1 1
Remote Station Only Parameters
Remote Unit RF Group (0-63) 0 0 0
Reboot New RF configuration -> Press Enter to Execute
Save Current Config to Flash Press Enter to Execute