Wi Lan Inc EB03 Benutzerhandbuch
Configuration
100
AWE 120-24 Installation & Configuration Guide
Setting the Reboot System Image
You can choose the system image that a unit uses when it is rebooted.
➧
To choose the reboot image
1.
From the Main Menu, select System Commands and press
Enter
. The System Commands menu is
displayed.
2.
Select Reboot a System Image and press
Enter
. The data field highlights.
3.
Scroll to select the image to use when rebooting.
4.
Press
Enter
. The name of the image file appears in the field. This image will be used the next time the
AWE is rebooted.
5.
Press
Esc
to exit to the Main Menu.
Rebooting the Current Image
The Reboot Current Image command can be used when the IP address is changed. See
➧
To reboot the current image
1.
From the Main Menu, select System Commands and press
Enter
. The System Commands menu is
displayed.
2.
Select Reboot Current Image and press
Enter
. The AWE reboots using the current image.
System Commands
Default System Image FACTORY-IMAGE
Reboot a System Image -> FACTORY-IMAGE
Reboot Current Image Press Enter to Execute
Restore Factory Config and Reboot Press Enter to Execute
Reset Radio Statistics Press Enter to Execute
Reset Ethernet Statistics Press Enter to Execute
System Commands
Default System Image FACTORY-IMAGE
Reboot a System Image FACTORY-IMAGE
Reboot Current Image -> Press Enter to Execute
Restore Factory Config and Reboot Press Enter to Execute
Reset Radio Statistics Press Enter to Execute
Reset Ethernet Statistics Press Enter to Execute