Itron Inc. DCU5310U Benutzerhandbuch
Installing the Mobile Collection 2.x System
Mobile Collection Hardware Installation Guide
39
Proprietary and Confidential
Note If the power cable does not reach the Mobile Collector, use the optional
extension cable to extend the length (extension cables may be purchased from Itron).
Install the power cable in line between the extension cable and the Mobile Collector.
Ensure that both cable ends are connected securely to each connector.
extension cable to extend the length (extension cables may be purchased from Itron).
Install the power cable in line between the extension cable and the Mobile Collector.
Ensure that both cable ends are connected securely to each connector.
3. Attach the GPS cable to the connector. Both the end of the cable and the connector
are gold-plated for easy identification.
Attach the GoBook to the Mobile Collector 2.x
This section describes how to connect the Mobile Collection laptop to the Mobile
Collector radio.
Collector radio.
The GoBook III and GoBook Max can attach directly to the Mobile Connector radio or
attach to a vehicle cradle mounted on a pedestal by the driver (for more information, see
attach to a vehicle cradle mounted on a pedestal by the driver (for more information, see
on page 35). The GoBook XR-1 and Panasonic Toughbook
are pedestal or sled dock mount only.
To attach the GoBook to the Mobile Collector, follow the steps in one of the following
sections:
sections:
GoBook MAX Procedures
GoBook III Procedures
on
page 39
on page
on page
on page 42
To attach the GoBook MAX to the Mobile Collector
1. Ensure that the Mobile Collector's locking mechanism is unlocked.
2. From the driver’s side of the vehicle, align the GoBook MAX with the four mounting
guides on top of the Mobile Collector.
3. Angle the top of the GoBook MAX towards the passenger door (as shown below),
and lower it so that the two rear connectors (1) on the Mobile Collector top fit into the
mating holes on the GoBook MAX underside.
mating holes on the GoBook MAX underside.