Itron Inc. 500GA Benutzerhandbuch
About the 500G Gas ERT Module
• A compatible meter (see the
on page 3).
• A compatible index. Itron 500G ERT modules are compatible with standard dial and direct-read
on page 3.
• Installation tools (provided by installer or customer).
• Small and medium flat-blade or Phillips screwdrivers.
• Side-cutting pliers/wire snips.
• Small putty knife.
• Meter seals, wire seal, and seal press.
• 11/32-inch nut driver or other blunt tool.
• Itron programming device:
• Side-cutting pliers/wire snips.
• Small putty knife.
• Meter seals, wire seal, and seal press.
• 11/32-inch nut driver or other blunt tool.
• Itron programming device:
FC200SR handheld computer with Field Deployment Manager (FDM) software
or
or
FC300 with SRead with Field Deployment Manager (FDM) software
or
or
900 MHz Belt Clip Radio with Field Deployment Manager (FDM) and a customer-supplied laptop
Note The FDM version required is dependent upon the 500G ERT module module model in use.
• Replacement screws:
Replacement Screws
Meter
To mount the 500G ERT
module on the meter:
module on the meter:
Itron Part
Number
Number
To mount the index on the 500G
ERT module housing:
ERT module housing:
Itron Part
Number
Number
Elster American
1/4 - 20 x 5/8" slotted, Fillister
head
head
8 - 32 x 3/16" slotted, Fillister head
Sensus/Rockwell
10 - 24 x 5/8" slotted, Fillister
head
head
6 - 32 x 5/8" slotted, Fillister head
Itron/Sprague
Sprague/Schlumberger 175
RM
Sprague/Schlumberger 175
RM
10 - 24 x 5/8" slotted, Fillister
head
10 - 24 x 1/2-inch, slotted
Fillister head
head
10 - 24 x 1/2-inch, slotted
Fillister head
SCR-0175-002
10 - 24 x 1/4" slotted, Fillister head
National/Lancaster
10 - 24 x 3/4" Phillips, flat-
head, stainless steel
head, stainless steel
SCR-0014-004
10 - 24 x 3/8" thread-forming, Phillips
pan-head to mount indexes with legs
6 - 19 x 3/8" thread-forming, Phillips,
Fillister head to mount indexes with
screw holes
pan-head to mount indexes with legs
6 - 19 x 3/8" thread-forming, Phillips,
Fillister head to mount indexes with
screw holes
SCR-0017-001
SCR-0037-001
SCR-0037-001
Commercial Meter
To mount the commercial
ERT module on the
meter:
ERT module on the
meter:
Itron Part
Number
Number
To mount the index (and index
assembly, if applicable) on the
commercial ERT module housing:
assembly, if applicable) on the
commercial ERT module housing:
Itron Part
Number
Number
Elster American
2A x 3.35" length, slotted
round-head drilled to accept
utility-approved wire seals
round-head drilled to accept
utility-approved wire seals
SCR-0062-001
12 - 24 x 1/2" slotted, Fillister head
machine screws, drilled to accept utility-
approved wire seals
machine screws, drilled to accept utility-
approved wire seals
Sensus
2A x 3.63" length, slotted
round-head drilled to accept
utility-approved wire seals
round-head drilled to accept
utility-approved wire seals
SCR-0062-002 2A x 2.94" length, slotted round-head
SCR-0062-003
Rockwell
For Aluminum Box Direct
Reading (VDR) index only
Reading (VDR) index only
SCR-0062-001
TDC-1671-000 OpenWay Riva 500G Gas ERT Module Installation Guide, Direct Mount
8
Proprietary and Confidential