ADC Telecommunications Inc. FWM1901B Benutzerhandbuch
ADCP-75-246 • Issue 1 • 6/2008
Page 17
© 2008, ADC Telecommunications, Inc.
5.5
Strand-Mount Installation
An accessory kit is available for mounting the microBTS enclosure from an overhead wire or
strand. The strand-mount kit can accommodate wire cable that ranges in size from 0.25 to 0.625
inches in diameter. A minimum break strength of 4400 lbs. is recommended. Stainless steel
cable is preferred.
strand. The strand-mount kit can accommodate wire cable that ranges in size from 0.25 to 0.625
inches in diameter. A minimum break strength of 4400 lbs. is recommended. Stainless steel
cable is preferred.
An installation drawing is provided with each strand-mount kit. Follow the instructions
provided on the drawing when installing the strand-mount kit. For all strand-mount
installations, form a drip-loop in the cables entering the enclosure.
provided on the drawing when installing the strand-mount kit. For all strand-mount
installations, form a drip-loop in the cables entering the enclosure.