KYE Systems Corp GKZGC Benutzerhandbuch

Seite von 30
User’s Guide
27/30 
5.  Troubleshooting 
 
When the RF keyboard and mouse do not work upon installation...
 
The  batteries  do  not  install  to  your  RF  keyboard  and  mouse  or  have  been  installed 
incorrectly.    Refer to 2.1 Installing the Batteries. 
 
The  RF  receiver  has  been  connected  to  your  computer  incorrectly.  The  green 
connector  goes  to  the  mouse  port,  the  purple  to the  keyboard  port.  Refer to  2.3 
Connecting the RF Receiver to Your Computer. 
 
The ID channel setting of the RF receiver, keyboard and mouse are not identical. Refer 
to 2.2 Setting up the ID Channel. 
 
When the cursor does not move properly or the keyboard does not work...
 
The  RF  receiver,  mouse  and  keyboard  are  placed  in  improper  distance.  Keep  the  RF 
receiver away from the mouse, keyboard, monitor, computer, and the electrical devices 
at least 20cm (about 8 inches).    Refer to 2.4 Setting up Your RF Desktop. 
 
Do not use your RF keyboard or mouse on a metal surface. Use a pad to prevent the 
radio channel from being interfering.   
 
When ACPI Power Management Keys cannot work properly...
 
The  ACPI  need  correct  OS  and  BIOS  to  support  it.  Now,  only  Windows98  (or  later) 
supports  ACPI  Power  Management  Keys.  If  you  use  any  other  systems,  ACPI  Power 
Management Keys should not work properly. If you already have Windows98 (or later), 
please make sure your system to meet  ACPI specs totally. If so, you can only get the 
sleep function. And if you want to fine which BIOS supports ACPI, please connect hyper 
link under below: 
http://www.microsoft.com/hwdev/onnow/ACPI_lists.htm