KYE Systems Corp GKZGC User Manual
User’s Guide
27/30
5. Troubleshooting
When the RF keyboard and mouse do not work upon installation...
The batteries do not install to your RF keyboard and mouse or have been installed
incorrectly. Refer to 2.1 Installing the Batteries.
The RF receiver has been connected to your computer incorrectly. The green
connector goes to the mouse port, the purple to the keyboard port. Refer to 2.3
Connecting the RF Receiver to Your Computer.
The ID channel setting of the RF receiver, keyboard and mouse are not identical. Refer
to 2.2 Setting up the ID Channel.
When the cursor does not move properly or the keyboard does not work...
The RF receiver, mouse and keyboard are placed in improper distance. Keep the RF
receiver away from the mouse, keyboard, monitor, computer, and the electrical devices
at least 20cm (about 8 inches). Refer to 2.4 Setting up Your RF Desktop.
Do not use your RF keyboard or mouse on a metal surface. Use a pad to prevent the
radio channel from being interfering.
When ACPI Power Management Keys cannot work properly...
The ACPI need correct OS and BIOS to support it. Now, only Windows98 (or later)
supports ACPI Power Management Keys. If you use any other systems, ACPI Power
Management Keys should not work properly. If you already have Windows98 (or later),
please make sure your system to meet ACPI specs totally. If so, you can only get the
sleep function. And if you want to fine which BIOS supports ACPI, please connect hyper
link under below:
http://www.microsoft.com/hwdev/onnow/ACPI_lists.htm