Bureau D' Electronique Appliquee Inc TD433 Benutzerhandbuch

75.5092 V2 July 2003 [Rev. 11/24/2003]

 

 

                

 

Page 1 of 2 

PRODUCT 
DESCRIPTION 

COMPONENT ID 

USERS GUIDE

  

 

FCC ID:  G9B-TD433 

  

IC: 

4680A-TD433 

  

IC: 

4680A-RD433

 

 

The TD433 series (PN:10TD433, 10TD433PB and 10TD433PB9V) Transmitter and the RD433 (10RD433) Receiver are a 
miniature pair, ideal for the opening of automatic doors. The transmitter is available in hand-held or pushplate style and 
transmits a unique rolling code each time the switch is closed to provide a secure door-opening signal.   The transmitter is 
powered by either a 12-volt (type 23A) or a standard 9V battery and a red indicator lights when the transmitter is activated.  

 
 

Frequency 433 

MHz 

Emitted Radio Power (transmitter) 

-5 dBm 

Power Consumption (transmitter) 

10mA 

Input Voltage (receiver) 

12 to 24 VAC/DC 

Operating Temperature 

14ºF to 131ºF (-10ºC to 55ºC) 

LEDs 

Yellow LED = Receiver Learn 
Red LED = Output Activation 

Dimensions (L x W x H) 
     Transmitter 
     Receiver 

 
2 ¼” x 1 

3/8

” x ½” 

(56 mm x 36 mm x 14 mm) 

3” x 2” x 1” 

 (77mm x 52mm x 27mm)

 

Certifications 

, FCC, IC 

 
 

 

ANTENNA 

OUTPUT ACTIVATION LED

12 TO 24 VAC/DC

RELAY NO 

RELAY NC 

RELAY COM 

DIP SWITCHES 

LEARN LED 

LEARN BUTTON 

 

 

KEY FOB 

PUSHPLATE WIRES 
(OPTIONAL) 

9V BATTERY 

(OPTIONAL)

OUTPUT LED 

TRANSMITTER 
SWITCH 

 

 
 
 
10RD433:  433MHz Digital Receiver (IC: 4680A-RD433) 
 
10TD433: 

Hand-Held Digital Keyfob Transmitter, 12V  

 

10TD433PB: 

Digital Keyfob Transmitter with pushplate wire leads, 12V 

10TD433PB9V: 

Digital Keyfob Transmitter with pushplate wire leads, 9V 

 
The Digital Transmitter and Receiver comply with Part 15 of the FCC rules.  Operation is subject to the 
following two conditions: 
 

1)  This device may not cause harmful interference and; 

 

2)  This device must accept any interference received including interference that may cause 

undesired operations.

 

 

 

Changes or modifications not expressly approved by B.E.A., Inc. for compliance could void the user’s 
authority to operate the equipment. 

 

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to part 15 of the FCC Rules.  These limits are designed to provide a reasonable protection 
against harmful interference in a residential installation.  This equipment generates, uses and can radiate 
radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful 
interference to radio communications.  However, there is no guarantee that interference will not occur in a 
particular installation.  If this equipment does cause harmful interference to radio or television reception, 
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures: 

•  Reorient or relocate the receiving antenna. 
•  Increase the separation between the equipment and receiver. 

•  Connect the equipment into an outlet on a circuit different from that to which the receiver is 

connected. 

•  Consult the dealer or an experienced radio/ TV technician for help. 

 

} 

(FCC ID: G9B-TD433)
(IC: 4680A-TD433)