INNCOM International Inc. 025010 Benutzerhandbuch
INNCOM
ȱPCȬ502.2ȱDatasheetȱ
Overview
ȱ
The INNCOM PC-502.2 wall mounted module can be used to expand the
range of a Layer-2 RF network or provide the protocol gateway from
INNCOM S5-bus to Layer-2 RF protocol.
range of a Layer-2 RF network or provide the protocol gateway from
INNCOM S5-bus to Layer-2 RF protocol.
In the Layer-2.2 802.15.4 Zigbee 2006 mesh network, the PC-502.2 is
designed to patch areas within the network where signal strength is lost
due to distance limitations or interference. It also serves to create multiple
pathways, increasing the redundancy of the mesh communications to
ensure maximum network reliability.
designed to patch areas within the network where signal strength is lost
due to distance limitations or interference. It also serves to create multiple
pathways, increasing the redundancy of the mesh communications to
ensure maximum network reliability.
Features
ȱ
x
Small wall mountable form factor
x
2.4Ghz IEEE 802.15.4 compliant RF transceiver (CC2430 radio
core)
core)
x
Medium and long range variants available
x
Industrial temperature ratings 0-65 degrees C
x
FCC Part 15b listed
Specification
ȱ
Parameter
ȱ
PC
Ȭ502.2ȱ
RF Data Rate
250kbps
Antenna Type
SMT
Indoor Range
100ft
Outdoor/ RF line-of-sight range
1000ft+
Transmit Power
10mW (+18dBm)
Receive Sensitivity
-94.6dBm
Frequency Band
2.4
05-2.475GHz
Encryption
AES-128
Protocol
802.15.4
Frequency Channels
15
Input Voltage
12VDC
Current Consumption
100mA (Peak)
Operating Ambient Temperature
40 ° C
LED /Switch
Reset indication, blinks when unit is connected to an RF
network. Rapid blink during binding association.
network. Rapid blink during binding association.
Figure 1 PC-502.2
10dBm
0-40℃,0-95%RH