HM Electronics Inc HS500 Benutzerhandbuch

 

5

•  Wear the microphone on your right or 

left side. 

•  Wear the battery end of the headset 

above your  
ear, on the side of your head opposite 
the earpiece. 

•  Adjust the headband for a comfortable 

fit. 

•  Hold the microphone boom at its base (See 

Figure 3) and pivot the boom up or down 
to adjust the microphone position to  the 
side of your mouth as shown in Figure 4. 

The headset control buttons are touch-
sensitive.   
They will activate when only slightly 

touched.  Use your fingertips, not your fingernails, to touch 
the buttons. 

Power Light 
•  The headset power light is red for lane 1, green for 

lane 2. 

•  The headset power light blinks while the headset is 

transmitting your voice. 

•  The headset power light is ON steady when the headset is 

not transmitting.  
 

Power On 
•  Press and release the power ON/OFF button to turn the 

headset on. 

•  A voice message in the headset says “Power on, lane one 

(or two).”  

•  The headset power light blinks green, then goes on 

steady red (lane 1)  

or green (lane 2). 
 

Power Off 
•  Press and hold the power ON/OFF button 2 seconds. 
•  A voice message in the headset earpiece says “Power 

off.” 

•  The headset power light goes off. 

Single-Step Volume Adjustment 
•  Lightly touch and release the Volume-up or Volume-down 

button. 

•  A beep sounds in the headset earpiece each time the 

button is pressed. 

•  As the volume increases, one step at a time, the pitch of 

the beep increases.