Seiko Instruments AB000001 Benutzerhandbuch
-
42
-
11. TROUBLESHOOTING
Please check the following points before asking for repair.
Q
Power does not turn on:
• Make sure the recommended AC adapter or battery pack is used.
• Make sure the AC cable and AC adapter are correctly connected.
• Make sure the AC adapter is correctly connected to the printer.
• Make sure the battery pack is fully charged.
• Make sure the AC cable and AC adapter are correctly connected.
• Make sure the AC adapter is correctly connected to the printer.
• Make sure the battery pack is fully charged.
Q
Printer does not print:
• Make sure the interface cable is correctly connected.
• Make sure the interface cable that meets the Interface Specifications listed on page 43.
• Make sure the transmission conditions for the printer and the host computer are correct.
• Make sure the recommended paper is used and the paper orientation (top/bottom) is correct.
• Make sure the interface cable that meets the Interface Specifications listed on page 43.
• Make sure the transmission conditions for the printer and the host computer are correct.
• Make sure the recommended paper is used and the paper orientation (top/bottom) is correct.
Q
POWER lamp blinks:
• See the Lamp Indication on page 18.
Q
Battery pack is not installed:
• Make sure the battery pack is correctly aligned.
• Make sure the correct battery pack is used.
• Make sure the correct battery pack is used.
Q
Battery runs out soon after charging:
• Make sure the battery has been correctly charged.
• If the battery does not recover to its full charge, it is almost dead. Replace it with a new one.
• If the battery does not recover to its full charge, it is almost dead. Replace it with a new one.