Lectrosonics Inc DB Benutzerhandbuch
DSW Digital Wireless System
LECTROSONICS, INC.
18
DB Transmitter Menu Map
From the main window, navigate with the arrow buttons
to the desired menu item and press MENU/SEL to
enter the setup screen.
to the desired menu item and press MENU/SEL to
enter the setup screen.
SEL
BACK
Freq.
Select option with arrow buttons
Use arrow buttons
to select value
to select value
22
Gain
SEL
BACK
Gain
Level meter at bottom of screen
Freq.
470
.675
Press MENU/SEL to highlight MHz or kHz
SEL
BACK
ProgSw
(none)
Mute
Power
Mute
Power
SEL
BACK
Rolloff
Rolloff
50 Hz
Select value with arrow buttons
SEL
BACK
Phase
Normal
Invert
Invert
Phase
SEL
BACK
BatType
Alk.
Lith.
Lith.
BatType
SEL
BACK
BatTime
SEL
BACK
Locked?
Yes
No
No
Locked?
SEL
BACK
Backlit
Backlit
On
30 sec
5 min
30 sec
5 min
Displays model number and firmware revision
SEL
BACK
About
DB
V1.01
V1.01
About
Bat 5:41
Reset?
Reset?
Yes
No
No
SEL
BACK
Default
Default
Settings
Settings
No
Yes
Yes
Select value with arrow buttons
Select option with arrow buttons
Select option with arrow buttons
Select option with arrow buttons
Select option with arrow buttons
Select option with arrow buttons
Select option with arrow buttons
SEL
BACK
WipeKey
No
Yes
Yes
WipeKey?
Select option with arrow buttons
After the desired selection if made, press BACK to
return to the menu.
return to the menu.
Gain - This setting determines the signal to
noise ratio and dynamic range that the system
will deliver. Review the setup procedure care-
fully for optimal performance.
noise ratio and dynamic range that the system
will deliver. Review the setup procedure care-
fully for optimal performance.
Freq. - Frequency can be set manually.
ProgSw - The programmable switch on the
top panel of the transmitter can be configured
for different functions with this setup menu.
top panel of the transmitter can be configured
for different functions with this setup menu.
Rolloff - The low frequency audio rolloff is
adjustable to optimize performance for envi-
ronmental conditions or personal preference.
adjustable to optimize performance for envi-
ronmental conditions or personal preference.
Phase - The polarity of the audio signal can
be reversed to match other microphones in
the system. Differences in polarity are due to
microphone designs and connector wiring.
be reversed to match other microphones in
the system. Differences in polarity are due to
microphone designs and connector wiring.
BatType - This setting makes the battery sta-
tus display more accurate, since alkaline and
lithium batteries behave differently as they are
discharged.
tus display more accurate, since alkaline and
lithium batteries behave differently as they are
discharged.
BatTime - A built-in timer can be used with
any battery type, but it is especially valuable
with rechargeable batteries such as NiMH
types. The voltage remains fairly constant
across the discharge time of a rechargeable
battery, then drops quickly near the end of
the operating time. The most accurate way to
determine runtime status is by testing the time
provided by a particular battery brand and
type, then using a timer to determine remain-
ing runtim.
any battery type, but it is especially valuable
with rechargeable batteries such as NiMH
types. The voltage remains fairly constant
across the discharge time of a rechargeable
battery, then drops quickly near the end of
the operating time. The most accurate way to
determine runtime status is by testing the time
provided by a particular battery brand and
type, then using a timer to determine remain-
ing runtim.
Locked? - The keypad can be locked out to
prevent inadvertent changes to be made.
prevent inadvertent changes to be made.
Backlit - The brightness and appearance of
the LCD can be adjusted for better viewing in
different lighting conditions.
the LCD can be adjusted for better viewing in
different lighting conditions.
About - Displays the firmware revision.
Default - The factory default settings can be
restored with this single setup screen.
restored with this single setup screen.
WipeKey - The encryption key can be erased
with this setup screen.
with this setup screen.