Mindray DS USA Inc. WT0707-00000 Benutzerhandbuch
Panorama™ Operating Instructions
0070-10-0690-01
9 - 69
System Setup Functions
Wireless Tab
Selecting the Read button will attempt to obtain a reading from the connected wireless
device.
device.
• A successful read from a known device will display the fields and sidebar buttons
appropriate to the attached device.
• An unsuccessful read will only display a connect status in the Connect field. The Device
ID, Software Version, and Hardware Version fields will be blank.
9.16.4.2
Program
Select the Program sidebar button to program information in a wireless device when it is
connected to the Panorama Central Station in Service mode.
connected to the Panorama Central Station in Service mode.
NOTE:
The Program sidebar button will be disabled until a valid
device has been detected by the Panorama Central Station.
device has been detected by the Panorama Central Station.
Selecting the Program sidebar button will display the message Are you sure you want
to program the wireless device?.
to program the wireless device?.
• Select the Yes button to program the wireless device. The message Wireless device
programmed successfully. is displayed.
• Select the No button to cancel the programming of the connected device.
9.16.5
Error Log Sidebar Button
Select the Error Log sidebar button to display the log of error messages for the connected
wireless device. Selecting the Error Log sidebar button will bring up the Error log for the
connected wireless device. When the Error Log sidebar button is selected the button is
changed to the Telepack sidebar button. FIGURE 9-49 shows the Error Log for the
Wireless tab.
wireless device. Selecting the Error Log sidebar button will bring up the Error log for the
connected wireless device. When the Error Log sidebar button is selected the button is
changed to the Telepack sidebar button. FIGURE 9-49 shows the Error Log for the
Wireless tab.
FIGURE 9-49 Error Log for the Wireless Tab
NOTE:
The Error Log sidebar button will be disabled until a valid
device has been detected by the Panorama Central Station.
device has been detected by the Panorama Central Station.
Printing a Telepack Error Log Report
A Telepack Error Log Report can be printed from this tab by selecting the Print menu bar
button.
button.