Nokia of America Corporation BBTRX-06 Benutzerhandbuch

Tools required for installation

Overview

This section provides a master list of all tools, materials, and parts required during the
installation process. Items required for installation of the RRH are listed within the
applicable chapter.

Tools

WARNING

Electric-shock hazard

If the installation is performed with energized DC circuits or with a battery backup supply
connected, an energy hazard exists.

Therefore, always use tools that are properly insulated.

The following is a master list, in alphabetical order, of all tools that may be utilized
during installation:
• Adjustable open-ended wrench (or set of fixed open-ended wrenches)
• Antioxidant compound
• Shackle links, or equivalent (quantity: 2)
• Bolt anchor setting tool
• Bonding clamps for facility and phone line cables (normally provided by telephone

company)

• Box cutter or equivalent, to open packaging
• Chalk line
• Channel-lock pliers [for 2-1/2 inch nuts, max. 3/4-inch (19 mm) wide]
• Channel-lock pliers (standard)
• Crimping tools 22-16 gauge, 10-4/0 gauge (5-120 mm

) for installation of terminal

lugs and c-taps (R-3695A)

• Derrick, capable of supporting a 500 lb. (220 kg) load
• Drill and drill bits (including 5/8" [16 mm] and 11/16" [18 mm] for drilling anchor

holes)

• Drill bit (3/4") for 5/8" through bolts, if required
• Drill - Pneumatic Hammer (R-5006),

Roto-Stop Hammer Kit (R-4416) with 1/2-inch (12 mm) chuck, or equivalent to drill
anchor holes

• Ear protection gear

Tools, materials, and checklist
Preparatory information

Tools required for installation

....................................................................................................................................................................................................................................

September 2012

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

4-3