Nokia of America Corporation BBTRX-06 Benutzerhandbuch
regulations regarding exposure to electromagnetic fields. The supplier of radio
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
equipment, the supplier of antenna equipment and the integrator and builder of the site
must provide sufficient information so that the limits of the exclusion zones can be
determined. Any changes to the antenna or other equipment in the transmit path may
require re-evaluation of the exposures to electromagnetic fields.
Human exposure
Pursuant to Health Canada Safety Code 6, Limits of Human Exposure to Radio frequency
Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, all installations
must be evaluated against the Maximum Exposure Limits as described in Chapter 2,
Health Canada 99-EHD-237.
Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, all installations
must be evaluated against the Maximum Exposure Limits as described in Chapter 2,
Health Canada 99-EHD-237.
Optical transmitters
Alcatel-Lucent declares that FDD RRH complies with the International Electrotechnical
Commission (IEC) standards IEC 60825-1 Edition 2.0 (2007) and IEC 60825-2 Edition
3.1 (2007). It is a Class I/1 laser optical fiber communication systems "product" under the
IEC classifications.
Commission (IEC) standards IEC 60825-1 Edition 2.0 (2007) and IEC 60825-2 Edition
3.1 (2007). It is a Class I/1 laser optical fiber communication systems "product" under the
IEC classifications.
This product is designed to ensure that personnel operating the product are not
endangered by laser radiation during normal operation and fault conditions. This product
does not present a risk of eye injury because it is fully enclosed and does not contain
embedded lasers greater than Class I/1 unless otherwise noted.
endangered by laser radiation during normal operation and fault conditions. This product
does not present a risk of eye injury because it is fully enclosed and does not contain
embedded lasers greater than Class I/1 unless otherwise noted.
CAUTION
Laser hazard
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.
herein may result in hazardous laser radiation exposure.
Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.
Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.
source is switched on.
Ensure that the optical source is switched off before disconnecting optical fiber
connectors.
connectors.
Product conformance statements
Canada
....................................................................................................................................................................................................................................
....................................................................................................................................................................................................................................
FDD RRH 700L
3MN-00075-0002-RJZZA
Issue 0
FDD RRH 700L
3MN-00075-0002-RJZZA
Issue 0
September 2012
Alcatel-Lucent – Proprietary
Use pursuant to applicable agreements
A-3