Nokia of America Corporation BBTRX-06 Benutzerhandbuch

China

Introduction

The statements that follow are the product conformance statements that apply to the FDD
RRH when deployed in China.

EMC Compliance

The equipment complies with the following electromagnetic compatibility specifications:
• CISPR 22 Class B

Product safety conformance

The equipment complies with the following product safety specifications:
• IEC 60950-1

Optical transmitters

Alcatel-Lucent declares that FDD RRH complies with the International Electrotechnical
Commission (IEC) standards IEC 60825-1 Edition 2.0 (2007) and IEC 60825-2 Edition
3.1 (2007). It is a Class I/1 laser optical fiber communication systems "product" under the
IEC classifications.

This product is designed to ensure that personnel operating the product are not
endangered by laser radiation during normal operation and fault conditions. This product
does not present a risk of eye injury because it is fully enclosed and does not contain
embedded lasers greater than Class I/1 unless otherwise noted.

CAUTION

Laser hazard

Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser radiation exposure.

Do not view directly into the laser beam with optical instruments such as a fiber
microscope because viewing of laser emission in excess of Class 1 limits significantly
increases the risk of eye damage.

Never look into the end of an exposed fiber or an open connector as long as the optical
source is switched on.

Ensure that the optical source is switched off before disconnecting optical fiber
connectors.

Product conformance statements

China

....................................................................................................................................................................................................................................

September 2012

Alcatel-Lucent – Proprietary

Use pursuant to applicable agreements

A-5