Alcatel-Lucent USA Inc. ONEBTS-11 Benutzerhandbuch
B - 4 1
Lucent Technologies – Proprietary
See notice on first page
See notice on first page
401-703-454
FOA Draft Issue 1
January, 2006
FOA Draft Issue 1
January, 2006
............................................................................................................................................................................................................................................................
Description of the AC
power cables
The installation requires the following AC power cable or cables.
•
#10 AWG 3-wire - for the heaters
•
#14 AWG 3-wire - for the convenience outlet, if applicable (not
present in international cabinets)
present in international cabinets)
DANGER
Electrical Shock Hazard
Installation of the Modular Cell 4.0B cabinets require
connections to be made that require AC power to be turned off
at specific circuit breakers in the non-Lucent power source.
Failure to follow instructions to turn off these breakers can
create an electrical shock hazard. Failure to follow the order
of the installation procedure (as written) can also create an
electrical shock hazard. The procedures in this manual do not
include safety procedures regarding working on energized
equipment. When this manual is used to install equipment in
an energized system, the appropriate safety procedures must
be followed in addition to the procedures in this manual.
connections to be made that require AC power to be turned off
at specific circuit breakers in the non-Lucent power source.
Failure to follow instructions to turn off these breakers can
create an electrical shock hazard. Failure to follow the order
of the installation procedure (as written) can also create an
electrical shock hazard. The procedures in this manual do not
include safety procedures regarding working on energized
equipment. When this manual is used to install equipment in
an energized system, the appropriate safety procedures must
be followed in addition to the procedures in this manual.
Follow these rules:
1.
Perform installation steps in the order provided.
2.
Observe and strictly follow all safety precautions.
3.
When completing electrical connections, always use
tools that are properly insulated.
tools that are properly insulated.