Alcatel-Lucent USA Inc. ONEBTS-11 Internal Photos
Applicant: Alcatel-Lucent
FCC ID: AS5ONEBTS-11
Exhibit 5
Section 2.1033 (c)(12) – External and Internal Photographs
Photographs (8”x10”) of the equipment of sufficient clarity to reveal equipment construction and layout, including,
if any, labels for controls and meters and sufficient views of internal constrution to define component placement and
chassis assembly. Insofar as these requirements are met by photographs or drawings contained in the instruction
manuals supplied with the product certification request, additional photographs are necessary only to complete the
required showing.
Response:
if any, labels for controls and meters and sufficient views of internal constrution to define component placement and
chassis assembly. Insofar as these requirements are met by photographs or drawings contained in the instruction
manuals supplied with the product certification request, additional photographs are necessary only to complete the
required showing.
Response:
Attached below are digital external and internal photographs of the Alcatel-ucent UMTS CDMA 850 Indoor Base
Transceiver Station (BTS). The UMTS CDMA 850 Transceiver is comprised of the UMTS-CDMA Multi-Carrier
CDMA Radio (MCR850), BNJ65; the C2PAM power amplifier, and the low loss, Dual Duplex (DDpx) bandpass
filters. Internal and external photographs of the MCR850 (FCC ID:AS5ONEBTS-08) and C2PAM (FCC
ID:AS5ONEBTS-13) showing construction and layout were provided in the initial filings and have not changed.
Transceiver Station (BTS). The UMTS CDMA 850 Transceiver is comprised of the UMTS-CDMA Multi-Carrier
CDMA Radio (MCR850), BNJ65; the C2PAM power amplifier, and the low loss, Dual Duplex (DDpx) bandpass
filters. Internal and external photographs of the MCR850 (FCC ID:AS5ONEBTS-08) and C2PAM (FCC
ID:AS5ONEBTS-13) showing construction and layout were provided in the initial filings and have not changed.
Page 1 of 4
Alcatel-Lucent – Proprietary
Use pursuant to Company Instructions