E F Johnson Company 2422001-1 Benutzerhandbuch
PULL DOWN MENUS
4-10
August 2000
Part No. 001-2001-200
Part No. 001-2001-200
4.6.4 FULL REPEATER
This menu selection walks through the alignment
of the entire repeater. The Receiver and Exciter por-
tions are performance tests and adjustments. The
Audio and Data portions are level adjustments for the
Main Audio Card (MAC). Refer to Figure 7-12 for an
alignment points diagram for the MAC.
tions are performance tests and adjustments. The
Audio and Data portions are level adjustments for the
Main Audio Card (MAC). Refer to Figure 7-12 for an
alignment points diagram for the MAC.
4.7 UTILITIES
Figure 4-27 UTILITIES MENU
4.7.1 COM PORT
This is the COM port used to send and receive
data from the Repeater MPC. An interface cable con-
nects the Repeater to the computer (see Figure 4-29).
This screen also selects the data baud rate.
nects the Repeater to the computer (see Figure 4-29).
This screen also selects the data baud rate.
Figure 4-28 COM PORT SELECTION
Figure 4-29 LAPTOP INTERCONNECT CA-
BLE
4.7.2 DISPLAY MODE
This screen allows the color mode to be selected
for color monitors. When using a laptop, monochrome
is recommended for better resolution.
is recommended for better resolution.
Figure 4-30 COLOR MODE SELECTION
4.7.3 USER LEVEL
There are two levels to choose from, Novice and
Advanced. The Novice uses prompts in the Edit-
Parameters screens when Escape or F2 keys are
pressed that ask "are you sure" before the task is exe-
cuted. The Advanced selection performs the task
without asking the question.
Parameters screens when Escape or F2 keys are
pressed that ask "are you sure" before the task is exe-
cuted. The Advanced selection performs the task
without asking the question.
TO MPC
TO LAPTOP