E F Johnson Company 2424140 Benutzerhandbuch

54

The following are definitions of the various error 

messages that may be displayed.

Aff Failed - A group affiliation attempt has received a 
FAILED response from the system. The precise reason 
for a FAILED response is manufacturer dependent. 

Aff Deny - A group affiliation attempt has received a 
DENIED response from the system. The precise 
reason for a DENIED response is manufacturer depen-
dent. One common cause is that the group is 
disallowed on the site/RFSS that the radio is 
attempting to affiliate on. 

Aff Refusd - A group affiliation attempt has received 
a REFUSED response from the system. The precise 
reason for a REFUSED response is manufacturer 
dependent. 

Answr Only - The user has attempted to initiate a 
private call or interconnect call and the feature is 
programmed for answer only. 

Bad Band - A profile/or user parameters have been 
downloaded with PCConfigure that are for a band 
different from the hardware of the radio. 

Bad ESN -The ESN of the radio is not valid. This 
error is usually only seen in the factory when first 
programming brand new logic boards. 

Bad Fl Fmt - A profile/or user parameters have been 
downloaded to the radio that do not match the file 
format supported by the firmware/software in the 
radio. 

Bad Hrdwar - The ESN of the radio is not valid. This 
error is usually only seen in the factory when first 
programming brand new logic boards. 

Batt Low - The battery voltage has been detected as 
being low. 

Busy - A call has been attempted and the system has 
responded that no channels are available for assign-
ment. 

Busy Tmout - The radio previously received a busy 
response from the system and it has not received a 

channel grant before the busy time-out timer has 
expired 

Disabled - The selected channel is disabled. 

Clear Only - The selected channel or group is 
strapped clear only and that a secure call can not be 
made. 

Corupt Prm - The radio has detected that its profile/
user parameters are not valid because the functional 
blocks can not be identified. 

Denied - A group call attempt has received a DENIED 
response from the system. 

Deny - A unit or interconnect call attempt has received 
a DENIED response from the system. 

Disabled - The feature that the user is attempting to 
use has been disabled on the radio either by program-
ming or by factory options. 

DSP Failed - The main processor and the DSP have 
failed to complete their startup procedure at powerup. 

EEPRM Fail - The main processor has timed out 
while trying to validate or invalidate the profile/user 
parameters in the EEPROM. 

Encryp Bad - The main processor and the Encryption 
Module have failed to complete their startup procedure 
at power up. 

Fixed High - The selected channel or group is 
strapped to high power and thus low power can not be 
selected. 

Fixed Low - The selected channel or group is strapped 
to low power and thus high power can not be selected. 

Too Hot - The mobile has passed the hot temperature 
threshold. Under these conditions the radio will only 
transmit in low power. 

Invalid - The received input from the user does not fit 
the criteria necessary for the feature. 

Invalid ID - The received ID from the user was not a 
valid ID.