E F Johnson Company 2425333 Benutzerhandbuch
5300 ES Series Mobile Radio Operating Manual
10-3
Secure Communication (Encryption)
If an attempt is made to transmit a secure message without loading the corresponding key,
“KEYFAIL” is displayed. The message must then be transmitted in the clear mode (this is
possible only if the channel is strapped to “switchable”) or the key must be loaded.
“KEYFAIL” is displayed. The message must then be transmitted in the clear mode (this is
possible only if the channel is strapped to “switchable”) or the key must be loaded.
10.2.1 Key and Algorithm IDs
Each encryption key is programmed with a Key ID (also called Logical ID). This ID plus
the algorithm ID (ALGID) is transmitted in the message on digital channels. The radio
receiving the message must have a key with the same IDs in order to decrypt it.
the algorithm ID (ALGID) is transmitted in the message on digital channels. The radio
receiving the message must have a key with the same IDs in order to decrypt it.
10.2.2 PID / SLN Key Management Modes
The channels, talk groups, and other calls that use encryption are linked to a specific
Physical ID (PID) when the radio is programmed. For example, Zone 1, channel 1 could
be programmed to select the key in PID 1 and Zone 1, channel 2 could select the key in
PID 3. The PID ranges are 0-63 when the PID mode is selected, and 1-64 when the SLN
mode is selected (see Figure 10.1).
Physical ID (PID) when the radio is programmed. For example, Zone 1, channel 1 could
be programmed to select the key in PID 1 and Zone 1, channel 2 could select the key in
PID 3. The PID ranges are 0-63 when the PID mode is selected, and 1-64 when the SLN
mode is selected (see Figure 10.1).
Note
The term “SLN” from the Project 25 specification is equivalent to “CKR” (Common Key
Reference) also used to define this parameter.
Reference) also used to define this parameter.
Figure 10.1
Key Selection Example
More information on these modes follows.
PID Mode - PID mode is analog encryption only. Since the EFJohnson System
Management Assistant (SMA) does not work with analog keys, PID mode can be used
only when keys are loaded using the Motorola KVL-3000 or KVL-3000 Plus
keyloader. When this mode is selected, keys are loaded directly into a PID of 0-63 that
corresponds to the PID programmed for each channel (if applicable). The Keys Table in
PC Configure is not programmed with this mode.
Management Assistant (SMA) does not work with analog keys, PID mode can be used
only when keys are loaded using the Motorola KVL-3000 or KVL-3000 Plus
keyloader. When this mode is selected, keys are loaded directly into a PID of 0-63 that
corresponds to the PID programmed for each channel (if applicable). The Keys Table in
PC Configure is not programmed with this mode.
SLN Mode - The SLN mode must be selected if either OTAR (Over-The-Air-
Rekeying) or the EFJohnson System Management Assistant (PDA keyloader) is used. It
can also be used if OTAR is not used. SLN mode is either analog or digital encryption,
Rekeying) or the EFJohnson System Management Assistant (PDA keyloader) is used. It
can also be used if OTAR is not used. SLN mode is either analog or digital encryption,
Algorithm ID
Keyset Name (Opt)
SLN 23
SLN 25
Algorithm ID
Keyset Name (Opt)
Key #21: Key ID 54
SLN 24
SLN 22
SLN 21
Keys Table
3
5
4
2
1
PID
Key #22: Key ID 65
Key #23: Key ID 67
Key #24: Key ID 69
Key #25: Key ID 73
Key #25: Key ID 90
Key #24: Key ID 91
Key #23: Key ID 99
Key #22: Key ID 98
Key #21: Key ID 94
Keyset 1
Keyset 2
Zone 1, Chan 2
Zone 2, Chan 4
Zone 2, Chan 5
Zone 3, Chan 1
Zone 3, Chan 2