E F Johnson Company 2425372 Benutzerhandbuch

Channels in the conventional priority scan lists are determined as follows. Channels in the 
SMARTNET/SmartZone/P25 Trunked priority scan lists are indicated only when editing a 
list (see “Editing a Priority Scan List”).

1 Enable Priority scanning as described in Section 4.11.1. Also select the scan list if 

applicable as described in the following “Selecting a Priority Scan List” description. 

2 Select the desired zone and then scroll through the channels by rotating the Select 

switch. When the displayed channel is in the scan list (scanned normally), the   
symbol is displayed next to the zone number as shown in the following illustration. 

Conventional Operation - The scan list is user selectable by the SCAN option switch. 
Refer to Section 5.10.1 for more information.

SMARTNET/SmartZone/P25 Trunked Operation - The scan list can be temporarily 
changed if the Scan (List) Select option switch is programmed. Refer to Section 6.11.2 for 
more information.

If the SCN ED (Scan Edit) option switch is programmed, priority scan lists can be user 
edited as follows (all operating modes). Changes are permanent (cycling power does not 
reselect a default condition). Proceed as follows:

1 Make sure that both priority and radio wide scanning are off (the rotating   icon is not 

indicated in the right status display). Select a conventional, SMARTNET/SmartZone/
P25 Trunked channel corresponding to the scan list being edited.

2 Select the scan list edit mode by pressing the 

SCN ED

 option switch. This mode is 

indicated by a triangle in the upper left corner of the display (see Figure 2.3).

3 If applicable, select the list to be edited by rotating and then pressing the Select switch. 

The selected scan list is indicated as “LIST x” as described in the preceding section. If 

Scan List Indicator

Chnl

No.