E F Johnson Company 2425372 Benutzerhandbuch

If the RWS ED option switch is programmed, the radio wide scan list can be edited. 
Changes are permanent (cycling power does not reselect a default condition). Proceed as 
follows:

1 Make sure that both priority and radio wide scanning are off (the rotating   icon is not 

indicated in the right status display). Select the scan edit mode by pressing the RWS ED 
option switch. This mode is indicated by a triangle in the upper left corner of the 
display (see Figure 2.3).

2 Select the channel you want to add or delete by rotating the Select switch. After the last 

channel in the current zone is displayed, the first valid channel in the next zone is 
displayed and vice versa. Lists are limited to 16 channels. If an attempt is made to add 
more than 16, “LIST FULL” is displayed and a channel must be deleted before another 
can be added.

3 If the selected channel is in the scan list (scanned), the   symbol is displayed next to 

the zone number as just described. To change the scan list status of the displayed 
channel, press the Select switch. 

4 To exit this mode and save the changes, press the RWS ED option switch again.

Scan List Indicator

Chnl

No.