E F Johnson Company 2425372 Benutzerhandbuch
Draft
December 2006
5300 ES Series Mobile Radio Operating Manual -1
S
E C T I O N
Section 6
SMARTNET/SmartZone/P25 Trunked
Features
An overview of the SMARTNET/SmartZone and P25 trunked operating modes is located
in Section 3.7. The following information describes the features unique to these modes of
operation. Refer to the “Radio Wide Features” section, Section 4, for information on
features common to all operating modes.
in Section 3.7. The following information describes the features unique to these modes of
operation. Refer to the “Radio Wide Features” section, Section 4, for information on
features common to all operating modes.
6.1
Analog and Digital Operation
Either analog or digital operation can be selected for communication on SMARTNET
traffic channels. Each talk group can be programmed for either type of operation. Digital
operation may be an optional feature.
traffic channels. Each talk group can be programmed for either type of operation. Digital
operation may be an optional feature.
6.2
Viewing Unit ID
When power is turned on with a SMARTNET/SmartZone channel selected, the five-digit
Unit ID from 1-65,535 is briefly displayed as IDxxxxx. When a P25 channel selected, the
eight-digit unit ID from 1-16,777,216 is displayed (see Section 5.15.1).
Unit ID from 1-65,535 is briefly displayed as IDxxxxx. When a P25 channel selected, the
eight-digit unit ID from 1-16,777,216 is displayed (see Section 5.15.1).
6.3
Standard Group Calls
Standard calls are between you and another mobile, group of mobiles, or a control station
(a radio in a fixed location). Most calls are probably this type. Proceed as follows to place
and receive group calls:
(a radio in a fixed location). Most calls are probably this type. Proceed as follows to place
and receive group calls: