E F Johnson Company 2425372 Benutzerhandbuch

TG on Rx - The alias of the talk group on which the call is being received is displayed.

User Group ID - If the group ID of the call being received is included in a 
preprogrammed User Group ID list, the alias programmed in that list for that group is 
displayed.

Private calls allow calls to be placed to a specific mobile unit. Either the Enhanced Private 
Conversation™ or standard Private Conversation modes may be programmed depending 
on the capabilities of the radio system. One difference between these call types is that the 
Enhanced type provides an indication that the called mobile is not on the air and the 
standard version does not. Operation in each of these modes is described in the following 
information.

The CALL option switch is required to place these calls, and either that switch or the 
RESP (Response) switch is required to receive them. Private calls are programmed to 
operate in one of the following modes:

• Disabled

• Answer-only capability

• List only - Unit IDs can be selected from a preprogrammed list only (direct entry as 

follows is not allowed)

• Unlimited - Unit IDs can be selected from a list and also dialed directly using the front 

panel controls or the keypad on the HHC.

To recall from a list:

1 Momentarily press the CALL (Private/Unit Call) option switch. The tag (alias) of the 

last called mobile is displayed.

2 To select another mobile, rotate the Select switch until the alias for the desired mobile 

is displayed. 

3 Press the PTT switch and one of the following events then occurs: