E F Johnson Company 2425770 Benutzerhandbuch
6-4
Viking Portable 600 Radio Operating Manual
SmartNet / SmartZone / P25 Trunked Features
• Unlimited - Unit IDs can be selected from a list and also dialed directly using the
keypad.
DTMF keypad models can be programmed to recall the unit IDs from a preprogrammed
list. However, only DTMF keypad models can be programmed to directly dial unit IDs.
list. However, only DTMF keypad models can be programmed to directly dial unit IDs.
6.3.1 Placing an Enhanced Private Conversation Call
To recall from a list:
1 Momentarily press the Private Call option button or select that menu parameter and the
alias of the last called radio is displayed. The private call mode is indicated by
in the
display.
2 If required, select another radio by pressing the Up/Down buttons until the alias of the
desired radio is displayed.
3 Press the PTT switch or the <F2> button to initiate the call.
(Proceed to the bulleted list which follows Item 3 in the next section for events that may
occur next.)
occur next.)
To make a direct entry using the DTMF keypad:
1 Press and hold the Private Call option button until a tone sounds. The last ID called is
displayed, and the private call mode is indicated by
in the display.
2 Using the 0-9 keys, dial the ID of the radio you are calling (five digits for Private calls
and eight digits for Unit calls). To erase the last digit, press the Down button, and to
cancel the call, press the Private Call Option button again.
cancel the call, press the Private Call Option button again.
3 Press the PTT switch to initiate the call. If the entered number is valid, the display
indicates the alias of the ID if it matches an ID in the call list. Otherwise, the ID you
entered continues to be displayed.
entered continues to be displayed.
Events that may then occur are as follows:
- If the radio being called is on the air, “Wait” is displayed and ringing is heard until
the called party answers or until the system terminates the call, whichever occurs
first. Pressing the PTT switch or an option button stops the ringing but not the call.
When the call is answered, the voice of the called party is heard.
first. Pressing the PTT switch or an option button stops the ringing but not the call.
When the call is answered, the voice of the called party is heard.
- If the called radio does not answer, a continuous tone sounds and “No Answer” is
displayed.
- If the called radio is not on the air, a continuous tone sounds instead of the ringing
tone and “No Ack” is displayed.
Preliminary Draft 3/9/12