E F Johnson Company 2425770 Benutzerhandbuch
Viking Portable 600 Radio Operating Manual
2-11
Controls and Display
2.5
Signaling Tones
Information is communicated to users of the Viking Portable radio using signal tones and
alerts and by LED signaling. Table 2.5 shows the information and signaling tones
supported by the Viking Portable radio. If you are viewing a PDF of this manual on a
computer equipped with a sound card, click on the Message Name to hear the tone.
alerts and by LED signaling. Table 2.5 shows the information and signaling tones
supported by the Viking Portable radio. If you are viewing a PDF of this manual on a
computer equipped with a sound card, click on the Message Name to hear the tone.
Table 2.5 Tones for the Viking Portable Radios
Message Name
Usage Description
Audible Description
Action Performed
Indicates that an action has been
performed.
1500Hz for 50ms, 0Hz for 50ms,
1000Hz for 50ms, 0Hz for 50ms,
1500Hz for 50ms
Alert
Used for transmit timeout warnings
and for failsoft alert.
1500Hz for 50ms
Alert Site Trunking
Used to notify the user that they have
entered site trunking.
1500Hz for 50ms
Alert Tone Keypress
Used to indicate the tone volume
during tone volume adjustment.
1000Hz for 100ms
Bad
Used to indicate a problem with the
user’s input.
300Hz for 100ms
Bad Condition
Indicates loss of sync in roaming
diagnostic mode.
300Hz for 150ms, 0Hz for 50ms
(played 3 times)
Callback
Notifies a user waiting in a busy state
that their call has started.
1500Hz for 50ms, 0Hz for 50ms,
1000Hz for 50ms, 0Hz for 50ms,
1500Hz for 50ms
Channel Busy
Indicates that the channel the user was
attempting to transmit on is busy.
300Hz for 150ms, 0Hz for 150ms,
300Hz for 150ms, 0Hz for 150ms,
300Hz for 150ms, 0Hz for 150ms,
300Hz for 150ms, 0Hz for 150ms
(played every 1200ms)
Clear Alert
Warns the user that they are
transmitting or receiving a clear call.
700Hz for 50ms
Click
Indicates that the soft buttons menu
has been moved left or right.
1500Hz for 3ms, 200Hz for 5ms
Double Click
Indicates that the soft buttons menu
has been moved to its start or end.
1500Hz for 3ms, 200Hz for 5ms,
0Hz for 75ms, 1500Hz for 3ms,
200Hz for 5ms
DTMF
Played during buttons presses for
DTMF features (Overdial and Keypad
DTMF).
1000HZ for 100ms
Dynamic Regroup
Notifies the user that their radio has
been dynamically regrouped.
765Hz for 25ms, 0Hz for 25ms
(played 6 times)
Emergency
Played when the user enters
emergency (and doesn’t have the radio
programmed for silent emergency).
1000Hz for 175ms
Emergency Cancel
Played when the user cancels
emergency mode (and doesn’t have
the radio programmed for silent
emergency).
1000Hz for 1000ms
Preliminary Draft 3/9/12