E F Johnson Company 2425M70 Benutzerhandbuch

Seite von 188
7-14
SMARTNET / SmartZone / P25 Trunked Features
7.9.3.1
Emergency Hot Mic
If Emergency Hot Mic has been enabled for emergency calls, automatic transmitting 
occurs with microphone audio unmuted without having to manually press the PTT switch. 
The automatic transmit period is programmed for 10-120 seconds in ten-second intervals. 
If the “Increment by 1” option (P25 Trunked only) is enabled, the automatic transmit 
period is programmed for 1-12 seconds in one-second intervals. If the Emergency Hot Mic 
feature or emergency calls are not enabled by programming, automatic transmitting does 
not occur. This feature is initiated only on the first press of the Emergency switch. 
Subsequent presses do not trigger automatic transmissions. To reset this function, hold the 
emergency button or cycle power.
7.9.3.2
Placing an Emergency Call
To place an Emergency Call:
If required, select a channel of a system on which Emergency Calls are enabled and 
press the Emergency option switch (or select the menu option). The Emergency Call is 
then sent as described in Section 6.9.1 if applicable.
Emergency tones sound as follows: Emergency Call entry is played upon the pressing 
of the Emergency button. Console Acknowledgement is played when an 
acknowledgement is received back from the console for an emergency Call. Emergency 
Exit is played when you press and hold the emergency button. Below are the tones for 
Emergency. 
If the preceding Emergency Hot Mic feature is enabled, the call is automatically 
transmitted without pressing the PTT switch. If it is disabled, press the PTT switch and 
begin speaking as with a standard call.
All group calls which follow are then emergency calls (private, telephone, and call alert 
calls are not allowed). If the channel is changed, the call is made on the emergency 
talkgroup programmed for the new channel. If the Surveillance Mode is enabled (see 
Section 5.10), all indicators, lights, and tones are disabled. If “No Receive Activity 
During Emergency” is programmed, receive audio, the front panel LED, and receive 
icons are disabled in the receive mode.
Note
Communications between the radio with the emergency and the dispatcher are closed. 
That is, other stations in the talkgroup can see “Emergency” toggle on their displays, and 
can listen to talk between the dispatcher and the radio with the emergency, but cannot talk 
to that radio.
Console 
Acknowledgement
Emergency Alarm 
Ack
Emergency Alarm 
Acknowledged 
Successful
Two 1000 Hz 175 ms tones with 
50 ms spacing followed by Three 
1000 Hz 175 ms tones with 150 
ms spacing
Emergency Call 
Entry
Emergency Button 
Press
Emergency button has 
been Pressed
1000 Hz continuous tone for 175 
ms.
Emergency Exit
Emergency Canceled Emergency is 
Canceled
1000 Hz continuous tone for 1 
sec.
Draft 4/29/2014