E F Johnson Company 2425M70 Benutzerhandbuch

10-5

Fixed Low - The selected channel or group is strapped to low power and thus high power 
can not be selected.

HC08 Fail - The HC08 was not initialized correctly and cannot be accessed for flash reads 
and writes, tone generations, etc. Applicable to ES series radios only.

Hot - The radio has passed the "Hot" temperature threshold and will only transmit in low 
power.

Invalid - The received input from the user does not fit the criteria necessary for the 
feature.

Invalid ID - The received ID from the user was not a valid ID.

Invald Key - The key pressed by the user was not valid for the current situation.

Invalid TG - This error indicates that the talkgroup entered into the radio by the user is 
invalid.

Invld User - This error indicates that the user’s radio ID was rejected by the system. This 
message is primarily related to data registrations.

Invld Ch - The channel entered by the user in keypad programming is not valid.

Key Fail - The encryption key required by the current selected group/channel is not valid.

Kypd Lockd - The keypad lock function is active and key presses are not accepted in this 
mode.

Kset Fail - The encryption key set chosen by the user is not valid.

List Only - Direct entry of a unit ID or phone number is disabled.

Locked - A selector lock command has been received and zone and channel changes are 
not accepted.

Lost Signl - Signal from the infrastructure has been lost during an interconnect call.

Low Power - This error indicates that the current channel is strapped to low power and 
that the user can not select high power at this time.

Msg Failed - No acknowledgement was received while sending a status report.

Narrow - The current conventional channel is programmed as a narrow channel.

No Ack - The radio did not receive an ACK for the current signaling attempt.

No Edit - The current list is not able to be edited.

No Encrypt - Encryption is not available for the selected channel.