E F Johnson Company 2425M80 Benutzerhandbuch

Draft 02 - Sep 1 2015

9-8

SECURE_ONLY

“Secure Only”
“SECR ONLY”
“Secure Only”

The user is attempting to transmit Clear on a Strapped Secure 

channel.

SLAVE_SCAN

“Slave Scan”
“SLAVE SCAN”
“Slave Scan”

If a conventional scan list is slaved to the current zone, this 

error will occur if the user attempts to select or edit another 

conventional scan list.

STATUS_FAILED

“Status Fail”
“STS FAILED”
“Status Fail”

This error indicates that no acknowledgement was received 

while sending a status report.

TEMP_HOT

“Hot”
“HOT”
“Hot”

This error indicates that the mobile has passed the hot 

temperature threshold. If the user transmits in this condition, 

the radio will display “Hot” and “Low Power”. Transmit power 

will be forced low.

TEMP_TOO_HOT

“Too Hot”
“TOO HOT”
“Too Hot”

This error indicates that the mobile has passed the TOO HOT 

temperature threshold. Under these conditions the radio will 

not allow transmit.

TX_TIMEOUT

“Tx Timeout”
“TX TIMEOUT”
“Tx Timeout”

This error indicates that the transmit timeout timer has expired 

and transmit has been terminated.

VOLTAGE_HIGH

N/A
“VOLT HIGH”
“Voltage High”

The mobile’s voltage source is too high. Transmit is not 

allowed in this condition.

VOLTAGE_LOW

N/A
“VOLT LOW”
“Voltage Low”

The mobile’s voltage source is too low. Transmit is not 

allowed in the condition.

ZONE_FAIL

“Zone Fail”
“ZONE FAIL”
“Zone Fail”

If Site Trunking and Display Site Trunking are enabled, this 

will be displayed if the zone controller goes down.

2

Bad File Format

The parameter file has a newer file format version than what 

matches the software in the radio.

3

Parms Fail

There is no parameter file in the radio.  

4

Bad Band

The radio band in the parameter file does not match the radio 

band in the tuning parameters. You will see this message if a 

parameter file for the wrong band is downloaded to the radio.