Nihon Kohden Corporation ZM-520PA Benutzerhandbuch
Operator’s Manual ZM-520PA/521PA/530PA/531PA
57
Basic Monitoring Operation
Using the Function Key
Function key
One of the following functions can be assigned to the Function key on the SYSTEM SETUP
screen. Refer to the “Changing SYSTEM SETUP Settings” section.
screen. Refer to the “Changing SYSTEM SETUP Settings” section.
SUSPEND ALARM: Suspends alarms on the receiving monitor before they occur for 2 minutes.
PAUSE:
PAUSE:
Pauses monitoring on the transmitter and receiving monitor.
CONFIRM:
Transmits the signal that the patient is confirmed and displays the
“PATIENT CONFIRMED” message on the transmitter.
NOTE
To use the Function key for PAUSE or CONFIRM, you must set “PROTOCOL” on the
SYSTEM SETUP screen of the transmitter to 51 and the receiving monitor must be able
to receive protocol 51. To use protocol 51, the ORG-9100A/ORG-9110A multiple patient
receiver software version 03-03 or later is required.
SYSTEM SETUP screen of the transmitter to 51 and the receiving monitor must be able
to receive protocol 51. To use protocol 51, the ORG-9100A/ORG-9110A multiple patient
receiver software version 03-03 or later is required.
ᚑ 㒙ጊޓᖘᏆ
ᛚ ⌀ᨩޓ⌬