Nihon Kohden Corporation ZM-520PA Benutzerhandbuch
Operator’s Manual ZM-520PA/521PA/530PA/531PA
61
5. Turn off the transmitter.
If the transmitter is not turned off and monitoring continues for the interval set for “AUTO
RESUME AFTER PAUSE” on the SYSTEM SETUP screen, pause monitoring is cancelled
and monitoring continues.
RESUME AFTER PAUSE” on the SYSTEM SETUP screen, pause monitoring is cancelled
and monitoring continues.
Resume Monitoring after Pause
To resume monitoring after pause, check that the electrodes, electrode leads and probe are
attached to the patient then turn on the transmitter.
attached to the patient then turn on the transmitter.
Confirming Patient
When the FUNCTION KEY is set to “CONFIRM” on the SYSTEM SETUP screen, pressing
the Function key sends a signal to the receiving monitor to indicate that the patient or patient
condition is confirmed by medical staff.
the Function key sends a signal to the receiving monitor to indicate that the patient or patient
condition is confirmed by medical staff.
Message
ᚑ 㒙ጊޓᖘᏆ
ᛚ ⌀ᨩޓ⌬