Nihon Kohden Corporation ZM-541PAA Benutzerhandbuch
10
ZM-540PA, ZM-541PA Operator’s Manual
WARNING
When performing defibrillation, discharge as far as
possible from electrodes, patches and any gel,
cream or medicine on the chest of the patient. If
there is a possibility that the defibrillator paddle
could touch these materials, remove them from the
patient. If the defibrillator paddle directly contacts
these materials, the discharged energy may cause
skin burn to the patient.
possible from electrodes, patches and any gel,
cream or medicine on the chest of the patient. If
there is a possibility that the defibrillator paddle
could touch these materials, remove them from the
patient. If the defibrillator paddle directly contacts
these materials, the discharged energy may cause
skin burn to the patient.
WARNING
When the transmitter is used with an
electrosurgical unit (ESU), firmly attach the entire
area of the ESU return plate. Otherwise, the
current from the ESU flows into the electrodes of
the transmitter, causing electrical burn where the
electrodes are attached. For details, refer to the
ESU manual.
electrosurgical unit (ESU), firmly attach the entire
area of the ESU return plate. Otherwise, the
current from the ESU flows into the electrodes of
the transmitter, causing electrical burn where the
electrodes are attached. For details, refer to the
ESU manual.
WARNING
Do not use the same transmitter for more than one
patient at the same time. Do not connect different
sensors from different patients to the same
transmitter.
patient at the same time. Do not connect different
sensors from different patients to the same
transmitter.
WARNING
This transmitter is not waterproof. If detergent or
liquid spills into the transmitter, stop using it and
contact your Nihon Kohden representative. If a wet
transmitter is used, the patient or operator may
receive an electrical shock or injury.
liquid spills into the transmitter, stop using it and
contact your Nihon Kohden representative. If a wet
transmitter is used, the patient or operator may
receive an electrical shock or injury.