Nihon Kohden Corporation ZM-930PA Benutzerhandbuch
Operator's Manual ZM-920PA/930PA
13
CAUTION
Never disassemble or repair the transmitter. When there is any
problem with the transmitter after maintenance and inspection,
contact your Nihon Kohden representative.
problem with the transmitter after maintenance and inspection,
contact your Nihon Kohden representative.
Maintenance
WARNING
If detergents or dirty liquid spills into the transmitter, clean it and dry
it completely before use. If the wet transmitter is used, the patient or
anyone in contact with the transmitter may receive an electric
shock.
it completely before use. If the wet transmitter is used, the patient or
anyone in contact with the transmitter may receive an electric
shock.
• Do not use a dirty sponge attachment tape. The measurement
value may be incorrect.
• When removing the probe from the attachment tape, do not pull the
sensor cable because this can damage the cable.
• Use the sponge attachment tape S and L only with the specified
products.
• Refer to the probe instruction manual for details.
• When any of the following occurs, the probe may be broken.
• When any of the following occurs, the probe may be broken.
Replace it with a new one and check the probe.
••••• The transmitter generates “pip” sound every 0.25 seconds.
••••• SpO
••••• SpO
2
data is 85% and blinking.