Nihon Kohden Corporation ZM-930PA Benutzerhandbuch
14
Operator's Manual ZM-920PA/930PA
Type Lifetime
Manganese About 1/2 of alkaline batteries
NiCd
NiCd
About 1/3 of alkaline batteries (when fully charged)
NiMH
About 1/2 of alkaline batteries (when fully charged)
Preparation
Installing (Replacing) Batteries
Use two AA(R6) type alkaline dry cell batteries, manganese dry cell batteries,
NiCd rechargeable batteries or NiMH batteries.
NiCd rechargeable batteries or NiMH batteries.
With new alkaline batteries, the transmitter can continuously measure ECG,
respiration and SpO
respiration and SpO
2
for approximately 3 days or ECG and respiration for
approximately 4 days. Operation time depends on the thickness of SpO
2
probe
attachment site.
NOTE
The capacity of manganese, NiCd and NiMH batteries is less than
that of alkaline batteries, therefore the lifetime of the battery is
shorter.
that of alkaline batteries, therefore the lifetime of the battery is
shorter.
CAUTION
Battery replacement must be performed by the operator. When
replacing batteries of the transmitter currently used for a patient,
disconnect electrode leads from the transmitter before replacing
batteries, or do not touch the patient during replacement.
replacing batteries of the transmitter currently used for a patient,
disconnect electrode leads from the transmitter before replacing
batteries, or do not touch the patient during replacement.
If electrode leads are attached to the patient and the person replacing the batteries
touches the patient, the patient leakage current over the amount allowed may
occur.
touches the patient, the patient leakage current over the amount allowed may
occur.
CAUTION
• Replace both batteries at the same time.
• Do not use different types of batteries together.
• Do not use different types of batteries together.