Nihon Kohden Corporation ZM-930PA Benutzerhandbuch
26
Operator's Manual ZM-920PA/930PA
Connecting the Electrode Lead and Disposable
Electrodes
Electrodes
Preparing the Patient Skin
Shave off excessive body hair.
To reduce skin impedance, clean the electrode site with cream or with a cotton pad
moistened with the electrode site with cream or with a cotton pad moistened with
alcohol. Thoroughly dry the skin with a clean cotton pad.
Shave off excessive body hair.
To reduce skin impedance, clean the electrode site with cream or with a cotton pad
moistened with the electrode site with cream or with a cotton pad moistened with
alcohol. Thoroughly dry the skin with a clean cotton pad.
NOTE
••••• For a patient with frequent body movement, rub the sites with
Skinpure skin preparation gel. However, do not use Skinpure skin
preparation gel for sensitive skin.
preparation gel for sensitive skin.
••••• Do not place electrodes on a wound or on an inflamed, wrinkled or
uneven skin surface.
Attaching Electrodes to the Patient
CAUTION
Do not reuse disposable items.
NOTE
••••• To maintain good contact between the electrode and skin, check
that the paste of the disposable electrode is not dry.
••••• When contact between the disposable electrode and skin becomes
poor, replace electrodes with new ones immediately. Otherwise,
contact impedance between the skin and the electrode increases
and the correct ECG cannot be obtained.
contact impedance between the skin and the electrode increases
and the correct ECG cannot be obtained.
Refer to the electrode operator’s manual for details.
1.
Connect the electrode lead to the electrode.