Nihon Kohden Corporation ZM-940PA Benutzerhandbuch

20

Operator's Manual  ZM-940PA

Turning On the Power
When the batteries are installed correctly, the power is
turned on.  A one second “peep” sounds and the startup
screen appears.  (There is no “peep” sound when there is
no battery power.)

Turning Off the Power
To turn off the power, remove batteries.

Peep

Check Items Before Use
Before turning on the transmitter power, check the following to confirm that the transmitter can
be used in normal and safe condition.

Appearance
• There are no damaged or dirty parts on the outside of the transmitter (LCD, keys, sockets,

battery case cover, battery case, lock plate, etc.).

• The transmitter is completely dry.
• The electrode lead, SpO

2

 probe and NIBP cuff are not broken.

• There are no damaged or dirty parts on the disposable SpO

2

 probe, disposable electrodes or

disposable NIBP cuff.

Batteries
• The battery polarity is correct.
• The battery case spring is firmly fixed and the battery is not loose.
• The battery case cover is firmly closed.
Channel Setting
• The transmitter channel corresponds to those of the receiving monitor.
• There is no transmitter in the surrounding area with the same channel.