HP 5185-3843 Benutzerhandbuch
Making a Wireless Network Connection 3-1
3
Making a Wireless Network Connection
Before You Begin...
This chapter describes how to configure the HP Jetdirect print server with a wireless
network connection to your network. Similar to connecting a network cable, a wireless
network connection is required before you can discover and install the printer on your
network systems. To configure a wireless connection, you must have a supported wireless
network connection to your network. Similar to connecting a network cable, a wireless
network connection is required before you can discover and install the printer on your
network systems. To configure a wireless connection, you must have a supported wireless
computer.
Verify the following:
You have a wireless computer with one of the following operating systems:
Microsoft Windows 9x, Me, NT 4.0, 2000, XP
Apple Mac OS 8.6, 9.x, X 10.1 or greater
Your system’s wireless configuration utility and interface card are working properly.
You have installed the HP Jetdirect print server hardware and have printed a Jetdirect
configuration page.
configuration page.
(infrastructure mode only) The access point on your network is operating properly.
Note
After setting up a wireless network connection, use caution when resetting the
print server to factory-defaults. The network connection will be lost, and you will
need to reconfigure the print server. See also page 5-14.
print server to factory-defaults. The network connection will be lost, and you will
need to reconfigure the print server. See also page 5-14.