HP 5185-3843 Benutzerhandbuch

5-4 Troubleshooting Problems

Configuration (Test) Page

The HP Jetdirect print server configuration page displays network status, configuration, 
statistics, and error messages.

Briefly press and release the test button

 on the rear end of the print server (illustrated  

On the next page is an example of a configuration page printed after the print server is 
fully installed.  See page 2-4 for an example before installation is complete.  To interpret 
entries and diagnose problems reported on the page, see the Administrator’s Guide 
(Models 610n/615n/680n/380x) on the HP Jetdirect CD-ROM provided with the print 
server.   

If the Configuration Page Does Not Print, or is Unreadable

If the configuration page does not print successfully (as described on page5-4), try the 
steps below. If the page prints but is unreadable, note step 4 particularly.

1. Make sure your printer is connected to your print server by a USB A-to-B cable. (This 

is the standard USB cable.)  Make sure that the cable is connected firmly to both the 
printer and the print server; fully inserting the plug into the print server takes more 
force than most USB connections.

Note

 That the print server does not support parallel-to-USB converters (for connect-
ing a parallel printer to a USB host); it works with USB printers only. 

2. Make sure that the printer and the print server are powered on.

3. Make sure that the printer is “Online” or “Ready”.