IQ Group Ltd QS5-02WD3130 Benutzerhandbuch
Entrance Alert
B
Figure 1
Transmitter
Transmitter
Align arrow for
installation
installation
LED Light (A)
Transmitter
Magnetic
piece
piece
Installation instructions: Please retain for future reference.
This Package Contains:
•
Plug-In Alert
•
Magnetic Piece, Transmitter & CR2032 Lithium coin cell battery
•
4 screws and 4 wall plugs for mounting the Magnetic piece & Transmitter
You will require:
•
A small Phillips head and Flat head screwdriver
Installation Instructions
For interior use only.
Please note: Installing the Transmitter or plug-in alert on or near metal
structures or reinforced PVC doors or doorframes may reduce the transmission
range.
For interior use only.
Please note: Installing the Transmitter or plug-in alert on or near metal
structures or reinforced PVC doors or doorframes may reduce the transmission
range.
Open the Transmitter and Magnetic piece as shown in
Figure 1.
Remove the front cover by inserting a flat head screwdriver
into the slot and twist gently.
Remove the front cover by inserting a flat head screwdriver
into the slot and twist gently.
Install the battery for Transmitter (Refer to Figure 2)
Position the front cover as shown and slide the CR 2032
Lithium battery into the holder as shown, with the + side of
the battery facing you.
Position the front cover as shown and slide the CR 2032
Lithium battery into the holder as shown, with the + side of
the battery facing you.
Install the Transmitter and Magnetic piece
Ensure the frame of the door or window is flat, clean
and dry. Mount the bases using the screws and wall
plugs provided (See Figure 3). Install both units
vertically. Align the arrows make sure both the
Magnetic piece and Transmitter are on the same level
of surface (See Figure 1). Do not mount the
Transmitter on or near large metal objects as this can
block signals from the wireless Transmitter.
Snap the front cover to the base. To
ensure a good alignment, adjust the
front cover of the Magnetic piece by
pushing or pulling the cover in and out
(3 adjustment levels).
Ensure the frame of the door or window is flat, clean
and dry. Mount the bases using the screws and wall
plugs provided (See Figure 3). Install both units
vertically. Align the arrows make sure both the
Magnetic piece and Transmitter are on the same level
of surface (See Figure 1). Do not mount the
Transmitter on or near large metal objects as this can
block signals from the wireless Transmitter.
Snap the front cover to the base. To
ensure a good alignment, adjust the
front cover of the Magnetic piece by
pushing or pulling the cover in and out
(3 adjustment levels).
Install the Plug-in Alert (Refer to Figure 4)
Plug the Plug-in Alert into any 120 VAC
outlet in the house. The Plug-in Alert must be
within 150 feet of the Transmitter.
Plug the Plug-in Alert into any 120 VAC
outlet in the house. The Plug-in Alert must be
within 150 feet of the Transmitter.
The Plug-
in Alert will play 2-note and 1-note sounds
when it is first powered up.
when it is first powered up.
Program Transmitter to the Plug-in Alert
(Refer to Figure 5)
Program the Transmitter. Open the door or window. A Ding-Dong should be
heard indicating the transmitter has been programmed to the Alert. Close the
door or window. A Ding should be heard. The LED light (A) will illuminate
indicating the transmitter is working.
Program the Transmitter. Open the door or window. A Ding-Dong should be
heard indicating the transmitter has been programmed to the Alert. Close the
door or window. A Ding should be heard. The LED light (A) will illuminate
indicating the transmitter is working.
Specification
Range………………..up to 150 ft.
Electrical Load………1 x CR2032 Lithium Battery for Transmitter
Electrical Load………1 x CR2032 Lithium Battery for Transmitter
Note:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received, including interference that
may cause undesired operation.
may cause undesired operation.
The changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. To comply with FCC
RF exposure compliance requirements, this device and its antenna must not be co-located or
operated in conjunction with any other antenna or transmitter.
compliance could void the user’s authority to operate the equipment. To comply with FCC
RF exposure compliance requirements, this device and its antenna must not be co-located or
operated in conjunction with any other antenna or transmitter.
To Reset the Alert Programming, press and hold
button B in Figure 6 until the plug-in chime sounds.
The chime will play the tunes available indicating
that previous programs have been erased. Return to the
Program Transmitter to the Plug-in Alert section and
repeat.
button B in Figure 6 until the plug-in chime sounds.
The chime will play the tunes available indicating
that previous programs have been erased. Return to the
Program Transmitter to the Plug-in Alert section and
repeat.
Troubleshooting
Figure 6
Alert doesn’t sound when door or window is opened or closed
Check that the battery has been inserted correctly. The LED light should
come on when the Transmitter moves closer to or away from the Magnetic
piece.
Check that the battery has been inserted correctly. The LED light should
come on when the Transmitter moves closer to or away from the Magnetic
piece.
Transmitter may be positioned out of range of the Plug-in Alert. Move
the Plug-in Alert closer to the Transmitter.
A metallic object may be blocking the signal to the Plug-in Alert from the
Transmitter position. Experiment with the location of the Plug-in Alert to
see if you can move it to a more suitable place.
the Plug-in Alert closer to the Transmitter.
A metallic object may be blocking the signal to the Plug-in Alert from the
Transmitter position. Experiment with the location of the Plug-in Alert to
see if you can move it to a more suitable place.
Figure 2
Magnetic
Piece
Battery in the Transmitter may need replacing.
The Transmitter LED will flash 5 times when the battery needs replacing.
See instruction for Installing the Battery.
Note: In cold conditions, poor location or environment, operating at
maximum range it is advisable to replace the battery more frequently (i.e.
every 12-18 months) to maintain optimum performance.
Your Transmitter and Plug-in Alert haven’t been programmed. Reset the
automatic programming of your Plug-in Alert by pressing and holding down
button
The Transmitter LED will flash 5 times when the battery needs replacing.
See instruction for Installing the Battery.
Note: In cold conditions, poor location or environment, operating at
maximum range it is advisable to replace the battery more frequently (i.e.
every 12-18 months) to maintain optimum performance.
Your Transmitter and Plug-in Alert haven’t been programmed. Reset the
automatic programming of your Plug-in Alert by pressing and holding down
button
B (Figure 6) for 5 seconds. The alert will sound indicating the
programming has been erased. Program the Transmitter following the
installation instructions.
installation instructions.
3 adjustment
levels
levels
Figure 3
For any other problem, call 1-800-296-1869 between 9am and 5pm EST.
IQ America Two Year Warranty
This is a “Limited Warranty” which gives you specific legal rights. You may also
have other rights which vary from state to state and province to province.
For a period of two years from the date of purchase, any malfunction caused by
factory defective parts or workmanship will be corrected at no charge to you. To obtain
a replacement, return the product to the place of purchase.
a replacement, return the product to the place of purchase.
NOT COVERED: Repair service, adjustment and calibration due to misuse, abuse
or negligence. Unauthorized service or modification of the product or of any furnished
component will void this warranty. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use or unauthorized service.
component will void this warranty. This warranty does not include reimbursement for
inconvenience, installation, setup time, loss of use or unauthorized service.
This warranty covers only IQ America products and is not extended to other
equipment and components that a customer uses in conjunction with our products.
This warranty is expressly in lieu of all other warranties, express or implied,
including any warranty, representation or condition of merchant ability or that the
products are fit for any particular purpose or use, and specifically in lieu of all special,
indirect or incidental or consequential damages.
products are fit for any particular purpose or use, and specifically in lieu of all special,
indirect or incidental or consequential damages.
Repair or replacement shall be the sole remedy of the customer and there shall be no
liability on the part of IQ America for any special, indirect, incidental or consequential
damages, including but not limited to any loss of business or profit, whether or not
foreseeable. Some states or provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not
apply to you. Retain receipt for warranty
damages, including but not limited to any loss of business or profit, whether or not
foreseeable. Some states or provinces do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may not
apply to you. Retain receipt for warranty
claims.
Figure 4
Figure 5
1x Magnetic piece,
1x Transmitter)
(WD
508
0-ACEPIKEP-N: MANL-WD
508
0-ACEPIKEP-N.ed4)
WD
5080:MANL-WD5080.ed1
Model WD5080
I-MANL-IQAPLPWD5080
IQ: IM-WD-5080A(25-11-09)-1