Charm Engineering Co. Ltd CAI001-BT33 Benutzerhandbuch
CORITICAL ACTIVITY INDEX
|
38
3.3 Inspecting sensor
To execute CAI monitoring system, check all sensors whether each CAIs sensor electrode has a
resistance value within reliable range. For sensor inspection, self-check is run on the system
automatically or sensor check can be initiated by touching [Sensor Check] icon.
When the sensor inspection was not passed immediately or when users initiated sensor
inspection manually, a sensor figure is displayed. On the sensor inspection screen, electrode
number distinguished by colors representing each electrode will be displayed and status of
each electrode will also be displayed.
resistance value within reliable range. For sensor inspection, self-check is run on the system
automatically or sensor check can be initiated by touching [Sensor Check] icon.
When the sensor inspection was not passed immediately or when users initiated sensor
inspection manually, a sensor figure is displayed. On the sensor inspection screen, electrode
number distinguished by colors representing each electrode will be displayed and status of
each electrode will also be displayed.
This symbol indicates that resistance of the electrode is within proper range. When all
electrodes pass the inspection, monitoring will be started automatically.
electrodes pass the inspection, monitoring will be started automatically.
When resistance of the electrode is not within the proper range.
In this case, the user should firmly push down the adhesive pad on each electrode of sensor
attached to the patient Followed by pushing the center of each electrode down for about 3
seconds.
If the problem was not improved, detach the sensors from forehead and reattach them to the
patient after removing oily and contamination materials, or reattach new sensors according to
assigned locations for attachment.
In this case, the user should firmly push down the adhesive pad on each electrode of sensor
attached to the patient Followed by pushing the center of each electrode down for about 3
seconds.
If the problem was not improved, detach the sensors from forehead and reattach them to the
patient after removing oily and contamination materials, or reattach new sensors according to
assigned locations for attachment.
Figure 3.3 Sensor check screen