MODERN ELECTRONICS FACTORY LIMITED ALB428B Benutzerhandbuch
ICWFV428-2055-01-IB.indd 24
10/05/2018 11:15:43 AM
OTHER WAYS TO PLAY
Bluetooth Wireless
Note: After powering on the speaker, the Mode/Connection LED will flash
multiple colors. This is normal, please wait for the Mode/Connection LED to
begin slowly flashing white before pressing the Mode button to switch to another
play mode.
multiple colors. This is normal, please wait for the Mode/Connection LED to
begin slowly flashing white before pressing the Mode button to switch to another
play mode.
Initial Bluetooth Connection
» Power on the speaker (see note above) and press the Power/Source button
to switch to Bluetooth Mode, indicated by a slowly flashing blue light from the
Mode/Connection LED and a voice prompt from the speaker.
Mode/Connection LED and a voice prompt from the speaker.
» Press and hold the Pair button to begin pairing. The Mode/Connection LED
will begin quickly flashing blue as it searches for a device. When pairing, remain
within 3 ft. of your device.
within 3 ft. of your device.
» On your Bluetooth device, open the Bluetooth Settings and select ICWFV428
from the list of available devices. It may take a moment before your device
detects the speaker and is available in the list. You may also need to scan for
Bluetooth devices manually from your mobile device.
detects the speaker and is available in the list. You may also need to scan for
Bluetooth devices manually from your mobile device.
» When successfully paired, the Mode/Connection LED on the speaker will turn
solid blue and a voice will announce the connection. Audio from the connected
device will now be played through the speaker.
device will now be played through the speaker.
» Use the controls on your device to select and begin playing audio. Use the
controls on the device or the speaker to play, pause, and adjust the volume.
Previously Connected Devices
The speaker can remember multiple Bluetooth devices and will always try to
reconnect to the last device it was paired with.
reconnect to the last device it was paired with.
To reconnect to a different device, turn off Bluetooth on unwanted devices, then
access the Bluetooth Settings on the device you wish to use and select ICWFV428
to reconnect to the speaker.
access the Bluetooth Settings on the device you wish to use and select ICWFV428
to reconnect to the speaker.
Bluetooth Connection Problems
If the speaker should become unpaired or will not connect normally, try the below
suggestions to re-establish a connection.
suggestions to re-establish a connection.
» On your device, open the Bluetooth Settings and turn Bluetooth off and on again.
Select the speaker from the list of available devices.
» On your device, open the Bluetooth Settings and delete the speaker (”Forget this
device”), then perform the initial connection steps again.
24