Gemalto Inc. PR01523 Benutzerhandbuch
Intelligent Document Reader AT10Ki User Guide
Reader components
Page 17 of 41
Red cross slow
flash
flash
Power up sequence failed to finish, return to service centre if fault persists.
Green tick flashing
USB cable is not connected and optional power supply is in use.
Yellow
– landing
lights
Reader has powered up correctly, is connected to the host application and is ready to
scan a document.
scan a document.
Back panel
The back panel features the USB 3.1 host communication port, Ethernet, 4 USB ports for peripherals, a
power supply connector, HDMI port (future enhnacement) and a power switch.
power supply connector, HDMI port (future enhnacement) and a power switch.
The Kensington® Security Slot can be used to tether the reader to the workspace.
USB Ports
Communication to and from the host PC in Legacy USB mode is via USB 3.1. The USB host interface is a
Type C connector which has the beenfit of being able to supply more power and is reversable.
Type C connector which has the beenfit of being able to supply more power and is reversable.
A built-in USB hub and two auxilliary USB 2.0 Type A connectors allow you to connect USB peripherals
such as a mouse, keyboard, printer, etc to the upstream USB3 connection. The two USB peripheral
connectors are capable of supplying +5V DC (500mA) to the peripherals if an appropriate power source is
used, see the Alternative Power Sources section below for details. When in networked mode these USB
ports can connect to the onboard Arm processor.
such as a mouse, keyboard, printer, etc to the upstream USB3 connection. The two USB peripheral
connectors are capable of supplying +5V DC (500mA) to the peripherals if an appropriate power source is
used, see the Alternative Power Sources section below for details. When in networked mode these USB
ports can connect to the onboard Arm processor.
There are 2 additional USB2.0 ports which are connected to the onboard Arm processor for use in
networked mode.
networked mode.
Ethernet Port
An RJ45 recepticle is provided for Ethernet connection, for best results use a CAT 6 cable capable of
1000Mbs operation..
1000Mbs operation..
HDMI Port
A micro-HDMI port is avaiable for local screen output, this is by request to Gemalto.