KEPID AMSTECH CO. LTD. EMU11A Benutzerhandbuch
2. Installing and Configuring Hardware
-13-
2.2 Installing EMU
DANGER
During EMU installation, be sure to turn off the power.
DANGER
Do not apply physical damage to the product. If the clamp is
separated or its insulation tube is stripped, it may cause injury or
death.
CAUTION
Only qualified persons must install EMU.
CAUTION
Be sure to install EMU in the distribution panel with an additional
lock. Only the qualified person must access the distribution panel.
CAUTION
Be sure to follow the instruction in this manual during installation.
Keep the specified specifications and regulations.
2.2.1 Installing the EMU body
To keep effective wireless network communication, do not install EMU in front of
interference generating materials or metal surfaces. If the embedded antenna is close
to the material, it can decrease the efficiency of the embedded antenna.
To mount the EMU on the wall, perform the following steps:
1. Prepare two screws.
2. Insert screws in the holes shown in Figure 1.2 and fasten them with a
screwdriver.
To mount the EMU onto a DIN rail, perform the
following steps:
1. Insert the EMU onto the DIN rail and move it to
a desired position.
2. Pull up the fix clip to fix the EMU.